The AMD PCIe based AMP demo runs on various flavors of AMD’s Embedded+ architecture that combines an AMD x86-64 processor with an Arm64 based Versal SOC w/ FPGA. The two systems are connected via PCIe with the x86-64 being the root-complex (RC, aka host) and the Versal being the end-point (EP, aka card).
Initially the demo is using a two board solution:
Sapphire IPC-FP6 AMD Ryzen™ Embedded V2000 w/ 8 x86-64 dual threaded cores
AMD VEK280 Versal evaluation board (2x A72 + 2x R5 + FPGA)
...
The demo will also be moved ported to true Embedded+ boards like the Sapphire Edge+ VPR-4616 and similar boards.
...
Demo Instructions:
The following instructions were written for a remote access dual board setup. Some of the instructions are specific to that environment:
Instructions for running the demo via JTAG and TFTP boot: sapphire-vek280-demo.md
Instructions/Hints for building the software: sapphire-vek280-demo-dev.md