Skip to end of banner
Go to start of banner

Run Android Automotive in Xen virtual machine on the AVA Platform

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Introduction

This document outlines the steps of setting up and running Android Automotive images on Linaro’s Trusted Reference Stack (TRS) using prebuilt images. When completed, you will be able to boot the Android Automotive OS (AAOS) image in a DomU (aka VM) running on top of the Xen Hypervisor using TRS in the Dom0. The AAOS image will utilize the AVA platform's frame buffer (unaccelerated) and use VirtIO serial device to enable keyboard and mouse.

If interested in building from source please refer to the following documents [1][2] for details.

Prerequisites

You will need the following to run this demo

  • AVA Platform

  • Display connected to the VGA interface

  • Enough disk space

  • Linux desktop (Tested on Ubuntu 22.04.3 LTS and Debian GNU/Linux 12 (bookworm), x86 is fine)

Prebuilt images

Prebuilt images can be pre-downlaoded as follows:

Flash the TRS image

TRS image can be flashed on either an NVME or a USB stick. The below script flash_trs.sh for flashing TRS wic image onto a block device, the block device can be either a NVMe or USB stick, it also extends the root file system partition to the end of the device to provide sufficient disk space for storing the Android Automotive OS image. 

#!/bin/bash

DEV=$1
sudo parted ${DEV} print

echo "Please confirm if the device is right?"
while : ; do
	read -n 1 k <&1
	if [[ $k = y ]] ; then
		printf "\n"
		break
	else
		printf "\nExit\n"
		exit 0
	fi
done

echo "Copy TRS image to the device ${DEV}"
sudo dd bs=4M if=./trs-image-trs-qemuarm64.wic of=$DEV status=progress && sync

sudo growpart $DEV 2
if [[ $DEV == *"nvme"* ]]; then
    ## Flash NVMe block device
    sudo e2fsck -f "${DEV}p2"
    sudo resize2fs "${DEV}p2"
else
    ## Flash USB block device
    sudo e2fsck -f "${DEV}2"
    sudo resize2fs "${DEV}2"
fi

sudo parted ${DEV} print

By following below steps, you can firstly download the prebuilt TRS wic image and flash it to NVMe or USB stick.

$ wget https://people.linaro.org/~leo.yan/arm_blueprint/aaos_on_xen/trs-image-trs-qemuarm64.wic
$ sh flash_trs.sh /dev/nvmeXn1  # for flashing TRS on NVMe block device
$ sh flash_trs.sh /dev/sdX      # for flashing TRS on USB stick

Note 1: The shell script requires the e2fsck and resize2fs utilities to be at least version 1.47.0 or newer. if not available, please download the e2fsprogs source and build it and install it.

Run Android Automotive in a Xen virtual machine

Once TRS system booted up, you need to download Android Cuttlefish image and uncompress it into the folder (/home/leoy/android-cf-mainline/cf ), this is because the overlay images contains the absolute path so we must uncompress the Cuttlefish image into an absolut path. The commands are:

# wget https://people.linaro.org/~leo.yan/arm_blueprint/aaos_on_xen/cuttlefish.tgz
# wget https://people.linaro.org/~leo.yan/arm_blueprint/aaos_on_xen/aaos_vm.cfg
# wget https://people.linaro.org/~leo.yan/arm_blueprint/aaos_on_xen/u-boot.bin
# mkdir -p /home/leoy/android-cf-mainline/cf/
# tar zxvf cuttlefish.tgz -C /home/leoy/android-cf-mainline/cf/

Launch Xfce4 windows manager:

# startxfce &

Run AAOS in a Xen virtual machine:

# export DISPLAY=:0
# xl -vvv create aaos_vm.cfg -c

We have a recorded video which has been uploaded to the server [3]. You can refer to it for how to lanch AAOS on Xen virtual machine.

[1] Xen: maintenance Xen and QEMU repos for TRS
[2] Xen: porting Android Cuttlefish on Xen Virtual Machine
[3] https://people.linaro.org/~leo.yan/arm_blueprint/aaos_on_xen/AAOS_On_Xen_Demo.MOV

  • No labels